Contact Us

Boniface Champion 3.5T

The Boniface Champion 3.5T has been designed and developed for the European marketplace as an economical yet reliable slidebed that stands up to the most demanding conditions.

More +

The Champion 3.5T allows the operator to easily load and unload vehicles by simply sliding and tilting the bed back. For those difficult to load low clearance cars, the shovel tail design provides for an even lower approach angle eliminating the need for planks or ramps. The durable lightweight aluminium deck provides for increased payload and comes standard with a manual sliding hydraulic winch to allow you to maintain a straight pull on the disabled vehicles tow eye. With the optional second car lift you can even increase your profits by transporting several cars at once. The galvanised subframe and tilt frame helps promote long life of the equipment.


Top of Page


  • Aluminium Deck
  • Aluminium Safety Side Raves
  • Shovel Tail Design for Lower Approach Angle
  • Bed Rollers Mounted in End of Deck
  • 8 Lashing Rings on Deck (4 Per Side)
  • Galvanised Subframe and Tilt Frame
  • Manual Control Levers
  • Hydraulic Winch with Wire Rope
  • Manual Sliding Winch Mechanism
  • Manual Winch Free Spool
  • LED Marker Lights Fitted into Side Raves (3 Per Side)
  • 4 Ratchet Straps with Soft Eyes
  • Towball Attachment
  • Pump
  • Winch Roller Guide
  • Cab Control Unit
  • Plastic Rear Mudguards w/ Mudflaps


  • Hydraulically Sliding Winch Mechanism
  • Additional Lashing Rings
  • Wheel Chocks (pair)
  • 1.2T Second Car Lift w/ Euro Wheel Grids
  • 1.2T Second Car Lift w/ Century Wheel Lift
  • Low Crash Bar
  • Full Height Beacon Flyer
  • Plastic Locker
  • Black Powder Coated Steel Locker
  • Polished Stainless Steel Locker
  • Fixed Granule Bin
  • Aluminium Side Under-Run Protection
  • 7 Pin Electrical Socket At Chassis Voltage
  • Wheel Skate Bed Ramps
  • Wheel Skates w/ Stowage (pair)
  • GoJaks 6200 w/ Stowage (pair)
  • Greedy Ramps w/ Stowage (pair)
  • Ferrari Ramps w/ Stowage (pair)
  • Wrecker Kit Stowed (Broom, Shovel, 7lb Sledge Hammer, 24” & 48” Bar,  Hard Hat & 6 Safety Cones)
  • 3T Trolley Jack Stowed in Locker
  • Dynacycle Motorcycle Frame w/ Stowage
  • Jump Leads
  • Jump Socket
  • LED Strobes Fitted into Front Grill (2x Amber)
  • LED Strobes at Rear (2x Amber or Red)
  • LED Beacon
  • LED Work Lights
  • LED Locker Lights
  • LED Marker Lights on Flyer (6x)
  • 2, 4, 6, 8 or 12 Function Radio Remote Control
  • PTO
  • Side Winching Capstan - 2 Or 4 Position With Post



Bed Length: 5.3M & 6.1M Options Available
Bed Width: 2.3M
Bed Rating: 3.5 Tonne UDL
Bed Construction: Aluminium Extrusion

Winch Capacity

Winch Capacity: 3.6 Tonne (EN14492 Compliant)
Cable Diameter & Length: 10mm x 24M
Cable Rating: 7.2 Tonne MBL

Important: All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Miller Industries Towing Equipment Inc. reserves the right to change or modify product and/or specifications without notice or obligation. Some equipment shown is optional.


This website stores cookies on your computer in order to collect information about how you interact with our website and allow us to remember you. We will only track your activity on our site if you consent by accepting our unique tracking cookie below. Please see our Privacy Policy and for more detailed information.