4 Axle Trailer
The 4 axle trailer was developed to carry more payload than the more commonly used three axle versions. The increase payload resulting from the addition of the fourth axle and the variety of loading options, two load angles & forward placed hydraulic ramps makes this trailer the choice of recovery operators seeking the most versatile trailer of this type on the market.
Features
Top of PageStandard
- 4x 12 Tonne Rigid Axles
- Automatic Slack Adjusters
- Spring Loaded Parking Brake
- 2” King Pin (Coupling Height: 1300mm)
- 18 tonne Capacity King Pin
- Hydraulic Landing Legs
- Spare Wheel Carrier
- 40mm Thick Hard Wood Floor
- Superwinch H30P Winch
- Hydraulically Powered Pantograph Mechanism Drive Allowing The Optimum Inclination To Load A Vehicle
- Rear Hydraulic Ramp
- 6 Pairs of Lashing Rings
- Plank Pit Between Spars (100mm Depth)
- Eight Reinforced Sockets For Telescopic Expanders Each Side
Optional
- Extreme Model (Coupling Height: 1060mm)
- Steel Floor
- Sliding Winch Mechanism
- Additional Lashing Rings
- Stainless Steel Trim On Sides
- Stainless Steel Name Plate On Rear
- Chain Hooks Along Bed Sides
- 6KG Fire Extinguisher
- Fire Extinguisher Stowage Box
- Radio Remote For Winch
Specifications
Deck Specification
| Deck Length: | 15.25M | |
| Deck Width: | 2.54M | |
| Deck Height: | 0.88M | |
| Deck Rating: | 44T | |
| Loading Angle - Tailboard: | 15° | |
| Loading Angle - Deck: | 5.5° |
Winch Specification
| Winch Capacity: | 14 Tonne @ 1st Layer (EN14492 Compliant) | |
| Cable Diameter & Length: | 20mm x 45M | |
| Cable Rating: | 28.4 Tonne MBL |
Important: All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Miller Industries Towing Equipment Inc. reserves the right to change or modify product and/or specifications without notice or obligation. Some equipment shown is optional.
Keywords: