Century 5130/5230

This could be one of the most versatile units in our fleet. The Century 5130 is designed with the capability of towing a wide range of vehicles, from passenger cars, vans, 7.5t vehicles and motor homes. With multi positional rear hydraulic stabilizer legs, single (5130) 25000 lbs winch or dual (5230) 25000 lbs winches and a 30 Ton recovery boom, the 5130/5230 is more than just another tow truck. This unit was designed to handle a wide variety of recovery jobs with the focus on the kerb weight.

At last a medium duty towing and recovery unit that will give your business the edge in your recovery operations.  

Century 5130 1 Century 5130 2


Standard Body Features:

 Boniface Stream Liner Body

 Dual Control Stations

 Hydraulic Pressure Gauges

 Tailboard Recovery Anchors

 Stainless Steel

 Safety Chains in Rear Pockets

 2 Large Forward Compartments each side

 Compartments Over the Wheel Well

 2 Small Rear Compartments each side

 Power Toolbox Compartment Locks

 LED Federal Standard #108 Lighting

 Flexible Wire Loom

 LED Toolbox Lights

 Rubber Fenderettes

 Mud Flaps

 Chain Rack

 Fork Holders

 Swing Storage

 Adjustable Shelves

 Rubber Isolators

 Enclosed Inner Wheel Wells

 Rear Stabilizer Legs

 Remote control hand set, (12 function)

 "D" Rings (Tailboard Mount)

Standard Boom Features:

 Power Elevation

 Power Extension

 Dual Planetary Hydraulic Winches

 Air Cable Tensioners

 Air Free Spool

 Diagonal Rear Spades

 Flipper Foot Spades

 Dual Hydraulic Pump

 360° Sheave Heads

 Cable Tie Backs

 Fork Riser Brackets

 

Standard Underlift features:

 Power Elevation

 Power Extension

 Power Tilt

 Hydraulic Fold

 3-Stage Design

 2 Piece Pivot Pin

 Upper/Lower Thrust Washer

 Handheld Lanyard

 Low Profile Crossbar

 70° Pivoting Crossbar

 Low Profile Fork Holders

 3 Pairs of Cast Steel Forks

 Spring hanger adaptors

 King pin adaptor

 Fork Riser Brackets

 1 Pair each of low, high and extra high pedestals

Optional features:

 SP2000

 Working Lights

 SUMO Sidewinder

 Tailgate Underlift Controls

 Aluminium Body

 LED Beacon

 Tunnel Crossovers

 Chrome Extrusion Moulding

 Convenience Group (Rails & Steps)

 LED Rear Lights

 Aluminium Tubular Light Pylon

 230/400 Voltage Generator

 Folding Wash down Sink

 Offset Fork Holder Extensions

 Stealth Flyer

 Rear Video & Monitoring System

 5th Wheel Plate
 (Requires Pintel Hook Attachment)

 Euro Grids (Tire Frame)

 Trailer Ball Adapter
 (Requires Pintel Hook Attachment)

 Heavy Duty Tire Lift

 Tire Lift Storage Brackets

 Ground Penetrating Plate

 Pneumatic Extending Working Lights

 Flipper Feet Grater Blades

 Additional Lift Forks

 Endless Loop Sling Package

 Backlit Control Stations

 Screw Pin Shackle Package

 Low Pull "D" Ring Kit

 Snatch Block Storage Bar or Rack

 Chain Package

 Rear Air & Eclectics

 Recovery Straps

 Rotator Beacon

 Snatch Blocks

 Work & Hook-Up Lighting

 Boom Angle Indicator

 Cab Control

 

 
 

Underlift:

Underlift  rating extended

7257kg  (16000lb) by 2870 mm

Underlift rating retracted

15875kg (35000lb) by 1244 mm

Underlift extendable by

1626 mm (hydraulic)

Underlift Tow rating:

44000kg

Boom:

 

5130

5230

Boom  structural retracted by 30° rating:

27215kg (60000lb)

27215kg (60000lb)

Boom  structural extended by 30° rating:

7257kg (16000lb)

7257kg (16000lb)

Boom Maximum angle:

39 degree

39 degree

Boom Maximum height:

6578mm

6578mm

Winch rating each:

11339kg (25000lb)

 2 x 11339kg (25000lb)

Winch Type:

Planetary 2-Speed

Planetary 2-Speed

Chassis Recommendation:

 GVW 28000kg


NOTE:  All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Boniface Engineering Ltd. reserves the right to change or modify product and/or specifications without notice or obligation.  Some equipment shown is optional

Terms & Conditions

 

Privacy Statement

Boniface Engineering Ltd. Howlett Way, Fison Industrial Estate, Thetford, Norfolk IP24 1HZ 

phone: +44 (0) 1842 754232    fax: +44 (0) 1842 765619     e-mail enq@boniface-eng.com