Euro Champion Slidebed The Euro Champion slidebed was designed and developed especially for the European marketplace where operators wanted a lightweight body which would stand up to the most demanding of recovery situations. The construction of the bed ensures the Euro Champion is  one of the toughest beds available  whilst providing durability and reliability – all of which are paramount in the arduous environment in which they work. The design also incorporates a 'shovel tail' section which reduces the initial loading angle of the bed allowing casualties with low ground clearance to be easily loaded. The galvanised subframe helps prolong equipment life whilst our unique plug and play electrical system promotes reliability and conformity throughout the whole of our slidebed range. With a long list of accessories and customisable options available, the Euro Champion slidebed is the ideal product for recovery operations of all sizes.

BS13698 Euro Champion 3.5T (5) BS13698 Euro Champion 3.5T (9) BS13698 Euro Champion 3.5T (18) BS13698 Euro Champion 3.5T (20)

Series

3.5

5

Capacity:

3500kg

5000kg

Aluminum Bed length:

6100 or 6400 or 5500 or 5000mm

7000mm or 6400mm

Steel Bed Length

6100 or 6400 or 5500 or 5000mm

7000mm or 6400mm

Aluminum:

Yes

Yes

Steel:

Yes

Yes

Winch capacity:

3628kg

(8000lb)

3628kg

(8000lb)

SCL rating:

1200kg

2500kg

Tow-bar rating:

2500kg

 

Aluminum body width

2180mm or

2280mm or

2400mm

2280mm or

2400mm

Steel body width:

2180mm or

2280mm or

2400mm

2280mm or

2400mm

Minimum GVW

10000kg upwards

12000kg to 14000kg

Options:

Sliding Winch

Fixed Winch

 
Bed/Body Equipment

SP 8,000 Hydraulic legs.

SP 8,000 Manual legs.

Flyer

Paint flyer in one solid colour

Mudguards 7.5t/10t/12t

Manual sliding winch

Bolt-on side winching capstan 1 post 2 position

Bolt on side winching capstan 1 post 4 position

Bolt on side winching capstan 1 post 6 position

Bolt on side winching capstan 1 extra post

Spare wheel holder using existing bracket

Extruded ali safety side safety rail

Extra Lashing rings

Paint aluminium side rails to match body

 

Locker/Stowage Options

Locker - Plastic 800x500x480

Locker - Plastic 520x360x360

Locker Brackets - Plastic lockers

Locker Brackets - Plastic lockers Wide Body

Locker - polished stainless

Locker - polished black

Locker - Boniface Super size

Locker brackets - Polished Black/stainless and Boniface Super

Locker - Boniface Paint Black with speedliner interior

Snatch block 4T

3 Ton trolley jack c/w stowage

Wrecker kit

Wrecker kit stowage bracket

PAS 43 Kit

PAS 43 Kit stowage

6kg fire extinguisher

Mounting bracket for fire extinguisher

Granule bin c/w mounting bracket

3 x 10 litre Jerry cans (steel)

Locker stowage for 3 x Jerry cans

Motorcycle frame (wheeled variety)

Motorcycle frame stowage

Wheel skates

Skate stowage bracket

Gojak 6000 (each)

Gojak stowage bracket mounted in centre of chassis

Gojak stowage bracket for use with steel locker

Ferrari ramps 1750mm

Ferrari ramps 1500mm

Ferrari ramp stowage

 

Electric and Light options

12 Function radio remote installed c/w valve

Plug & Play electrics including cab control unit

2 x Extra work lights

6 LED rear lamps for flyer

Economic light bar - 2 rotator c/w duplicated rears - installed

Beacon (Code 3) 4 rotator c/w duplicated rears - installed

Beacon (Code 3) 4 rot c/w dup rears & oscillating reds - installed

Ultra slim LED beacon c/w duplicated rears - installed

LED Strobes amber

LED Strobes Red

Light in tool locker

Jump lead cables Anderson

Jump lead cables with surge protector

Rear towing electric sockets at truck voltage (24v)

Rear towing electric sockets at truck voltage (12V)

Rear towing electric sockets dropped from 24v to 12v

Anderson jump sockets mounted next to battery 12v

Anderson jump sockets mounted next to battery 24v

NOTE:  All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Boniface Engineering Ltd. reserves the right to change or modify product and/or specifications without notice or obligation.  Some equipment shown is optional

Terms & Conditions

 

Privacy Statement

Boniface Engineering Ltd. Howlett Way, Fison Industrial Estate, Thetford, Norfolk IP24 1HZ 

phone: +44 (0) 1842 754232    fax: +44 (0) 1842 765619     e-mail enq@boniface-eng.com