Recoverer Trident Major accidents demand quick responses and where lifting as well as winching is needed, even the most experienced professional will appreciate the lifting capability that the Boniface Recoverer Trident brings to the scene.
Fabricated from extra high tensile steel to give the strength and safety margins for which Boniface equipment is renowned, the Recoverer Trident’s hydraulically powered two stage boom can be simultaneously extended and elevated to allow the rapid and precise positioning needed for delicate winching and lifting operations.
Boom control is by hand remote as well as by manual control valves. For maximum stability and safety, rear hydraulic stiff legs are standard on the Recoverer Trident. Recoverer systems are designed for 3 or 4 axle chassis and are installed with the exact Boniface Interstater heavy underlift most suited to the customer’s needs. Able to cope with virtually any emergency, they provide the recovery operator with the ultimate in performance and versatility. Systems are available in kit form and most optional features from the Interstater Underlift range can be built into the vehicle to precisely meet the customer’s requirements.

BS16437 Trident 9055 (3) BS16437 Trident 9055 (1) BS16437 Trident 9055 (2)

 

Standard Body Features

 Boniface Stream Line Body

 Dual Control Stations

 Hydraulic Pressure Gauges

 Tailboard Recovery Anchors

 Stainless Steel

 Safety Chains in Rear Pockets

 2 Large Forward Compartments each side

 Compartments Over the Wheel Well

 2 Small Rear Compartments each side

 Power Toolbox Compartment Locks

 LED Federal Standard #108 Lighting

 Flexible Wire Loom

 LED Toolbox Lights

 Rubber Fenderettes

 Mud Flaps

 Chain Rack

 Fork Holders

 Swing Storage

 Adjustable Shelves

 Rubber Isolators

 Enclosed Inner Wheel Wells

 Rear Stabilizer Legs

 Remote control hand set, (12 function)

 "D" Rings (Tailboard Mount)

Standard Boom Features

 Power Elevation

 Power Extension

 Dual Planetary Hydraulic Winches

 Air Cable Tensioners

 Air Free Spool

 Diagonal Rear Spades

 Flipper Foot Spades

 Dual Hydraulic Pump

 360° Sheave Heads

 Cable Tie Backs

 Fork Riser Brackets

 

 

Standard Underlift features
 Power Elevation  Power Extension
 Power Tilt  Hydraulic Fold
 3-Stage Design  2 Piece Pivot Pin
 Upper/Lower Thrust Washer  Handheld Lanyard
 Low Profile Crossbar  70° Pivoting Crossbar
 Low Profile Fork Holders  3 Pairs of Cast Steel Forks
 Spring hanger adaptors  King pin adaptor
 Fork Riser Brackets  1 Pair each of low, high and extra high pedestals

 

Optional Equipment
 SP 850-XP  Working Lights
 SUMO Sidewinder  Tailgate Underlift Controls
 Aluminium Body  LED Beacon
 Tunnel Crossovers  Chrome Extrusion Molding
 Convenience Group (Rails & Steps)  LED Rear Lights
 Aluminum Tubular Light Pylon  230/400 Voltage Generator
 Folding Washdown Sink  Offset Fork Holder Extensions
 Stealth Flyer  Rear Video & Monitoring System
 5th Wheel Plate
 (Requires Pintel Hook Attachment) 		 Euro Grids (Tire Frame)
 Trailer Ball Adapter
 (Requires Pintel Hook Attachment) 		 Heavy Duty Tire Lift
 Tire Lift Storage Brackets  Ground Penetrating Plate
 Pneumatic Extending Working Lights  Flipper Feet Grater Blades
 Additional Lift Forks  Endless Loop Sling Package

 

 

A

B

C

D

Lowrider

1574mm

3454mm

H-Maxireach Lowline

1957mm

1747mm

4258mm

4048mm

I-Lowline

1776mm

1566mm

3710mm

3500mm

Underreach specification
  Lowrider H-Maxireach Lowline I-Lowline
Underlift  rating extended 7711kg  (17000lb) by 3454mm 9000kg  (19841lb) by 4258mm 9000kg (19841lb) by 3710mm
Underlift rating retracted 25000kg (55000lb) by 1574mm 33000kg (72752lb) by 1957mm 33000kg (72752lb) by 1776mm
Underlift extendable by 1900mm (hydraulic) 2301mm (hydraulic) 1934mm (hydraulic)
Underlift Tow rating:

44000kg

44000kg

44000kg

Boom specification
  3 Stage Boom
Boom  structural retracted by 30° rating: 45359kg (100000lb)
Boom  structural extended by 30° rating: 8164kg (18000lb)
Boom Maximum angle: 39 degree
Boom Maximum height: 7594mm
Double Winch rating each: 14061kg (31000lb)
Winch Type: Planetary 2-Speed
Chassis Recommendation: Front Axle: 9500kg (20000lb)

Rear Axle:  19000kg (40000lb)  

NOTE:  All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Boniface Engineering Ltd. reserves the right to change or modify product and/or specifications without notice or obligation.  Some equipment shown is optional

Terms & Conditions

 

Privacy Statement

Boniface Engineering Ltd. Howlett Way, Fison Industrial Estate, Thetford, Norfolk IP24 1HZ 

phone: +44 (0) 1842 754232    fax: +44 (0) 1842 765619     e-mail enq@boniface-eng.com