Press Release

February
All the pictures below can be seen larger by clicking on the image

Boniface manufacture a wide range of side winching equipment at their factory in Thetford and bring into the UK a variety of equipment that can be used in conjunction with transporters and recovery equipment. The most recent addition to the range are the SP 8000 and 20,000, the smaller of the two when combined with a car carrier provides operators with a versatility that enables them to undertake all manner of recovery and accident work as well as the usual car transportation. They feature Ramsey or DP winches and are available with either manual or hydraulic stabiliser legs; the operation is user friendly allowing the operator to extend a leg, manually or hydraulically to the side of the recovery truck, then using the centrally mounted winch reeve the cable to right or left and after attachment to a casualty side winching can be safely undertaken. This type of equipment is often combined with medium duty towing equipment which adds to the winching performance, this often can enable users of this size of equipment to undertake tasks normally much heavier trucks carry out. Boniface will exhibit this equipment at recovery exhibitions throughout the year along with the heavy range of side winching products.

Another Boniface product which has been available for many years is the Sidewinder; this is combined with all the Boniface heavy duty products, Interstater, Recoverer and more recently the Rotator. This was designed in the UK initially to compliment high performance towing vehicles, it improves the recovery performance and adds weight to a towing vehicle right where it’s needed, at the front, increasing stability. Boniface have combined this product with Rotators which in some instances has increased the amount of winches on a vehicle to six, these trucks have become some of the most powerful recovery units in the world with phenomenal ability to grab hold of a overturned truck and right it, clearing blocked roads in as short a time as possible. The Sidewinder can be fitted with either one or two 30,000 lb winches each with 50 metres of 20 mm diameter cable, thoroughly tested over the years by both Boniface engineers and recovery operators the product is sold around the world.

boniface Sidewinder.jpg (321972 bytes)

Boniface SP8000 fitted in front of a slidebed.JPG (2373973 bytes)

DSC05705.jpg (550421 bytes)